Gå til produktoplysninger
1 af 10

VW Golf Mk6 1.4TSI (122bhp) Back Box Slet

VW Golf Mk6 1.4TSI (122bhp) Back Box Slet

SKU:PDVW16

Normalpris £205.00 GBP
Normalpris Udsalgspris £205.00 GBP
Udsalg Udsolgt
Inklusive skatter.
Et bageste sektion i rustfrit stål (bagboks sletning) til VW Golf 1.4TSI 122bhp 2009 - 2012>
 
Leveres med poleret rustfrit dobbelt flået skråstreg skåret Twin 3 "halepipes
Gratis P&P
Gratis livstidsgaranti
Høj grad 304 rustfrit stål
Fuldt tig svejset
Mandrel bøjer sig
Kommer klar til at klemme på med passende instruktioner, selvom vi vil anbefale, at du har dette monteret i en lokal garage.
 
En omkostningseffektiv måde at forbedre lyden og udseende på din bil
 
Bemærk, at dette kun passer til standardsystemet og standarddiffusoreneller enhver eftermarkedsdiffusor, der er designet til at passe til standardudstødningenFor MK6 VW Golf 1.4TSI 122bhp
Billede 2 og 3 viser indstillingen 'i rullet' halepør, der er monteret på bilen
 
Sørg for, at du læser dette ordentligt, da alle vores produkter er lavet til at bestille, derfor accepteres ikke returnering - hvis du er usikker på, om det passer til din, bedes du kontakte os med din reg, og vi vil bekræfte.
Ring til os på 01333 421204
E -mail os på info@pipedynamics.co.uk
 

Se komplette oplysninger

Customer Reviews

Based on 5 reviews
80%
(4)
0%
(0)
20%
(1)
0%
(0)
0%
(0)
H
Harry
Vw golf “s” 2009

I have the same question as Sam on this page. I currently have a VW Golf “S” not a TSI, will this fit the same?

Many thanks

S
Sam
Mk6 1.4, not tsi

Hi there I have a mk6 1.4 s, NOT THE TSI, will this still fit, if not do you have any products or know anyone that has any that do fit?

O
Ole Jakob Oldebråten
Exhaust

Hello Pipe dynamics!

I have a Golf mk5 1.4 170bhp and I wonder if it also fits my car?

Thanks
- Ole Jakob

R
Remy
Silencieux arrière

Bonjour savez vous si cela s'adapte sur mk6 1.4 16v s'il vous plaît ?

T
Thomas Goldie
Exhaust hanger

Exhaust hanger doesn’t seem to be in the right place as the standard one is offset upwards were as the one is just a straight bar, just something I seen in a video that was of the 1.4 tsi mk6 golf same as mine

Hi Thomas,

Thanks for your review.

I'm sure you will see, from the video that you refer to, that the customer didn't follow the correct fitting instructions we provided and decided to cut the back box off in a place he thought would make the exhaust sit right, which was about 2' short of where we indicate on the instructions, which then resulted in the exhaust not fitting or sitting right and the hanger not reaching the rubber - had he cut the box off at the weld the exhaust would've fitted perfectly and the hanger would've fitted into the rubber no problem (as you can see in the image on this listing) we have made and fitted hundreds of these so we can guarantee where the cut needs to be made. The shape of the hanger in comparison to the standard hanger is irrelevant as you can see, the whole rear section is a completely different design so the hanger on this back box delete is exclusively designed to for fitment of this part to the standard rubber.

If you purchased one and followed the instructions correctly - it would fit

Thanks

Pipe Dynamics

Customer Reviews

Based on 5 reviews
80%
(4)
0%
(0)
20%
(1)
0%
(0)
0%
(0)
H
Harry
Vw golf “s” 2009

I have the same question as Sam on this page. I currently have a VW Golf “S” not a TSI, will this fit the same?

Many thanks

S
Sam
Mk6 1.4, not tsi

Hi there I have a mk6 1.4 s, NOT THE TSI, will this still fit, if not do you have any products or know anyone that has any that do fit?

O
Ole Jakob Oldebråten
Exhaust

Hello Pipe dynamics!

I have a Golf mk5 1.4 170bhp and I wonder if it also fits my car?

Thanks
- Ole Jakob

R
Remy
Silencieux arrière

Bonjour savez vous si cela s'adapte sur mk6 1.4 16v s'il vous plaît ?

T
Thomas Goldie
Exhaust hanger

Exhaust hanger doesn’t seem to be in the right place as the standard one is offset upwards were as the one is just a straight bar, just something I seen in a video that was of the 1.4 tsi mk6 golf same as mine

Hi Thomas,

Thanks for your review.

I'm sure you will see, from the video that you refer to, that the customer didn't follow the correct fitting instructions we provided and decided to cut the back box off in a place he thought would make the exhaust sit right, which was about 2' short of where we indicate on the instructions, which then resulted in the exhaust not fitting or sitting right and the hanger not reaching the rubber - had he cut the box off at the weld the exhaust would've fitted perfectly and the hanger would've fitted into the rubber no problem (as you can see in the image on this listing) we have made and fitted hundreds of these so we can guarantee where the cut needs to be made. The shape of the hanger in comparison to the standard hanger is irrelevant as you can see, the whole rear section is a completely different design so the hanger on this back box delete is exclusively designed to for fitment of this part to the standard rubber.

If you purchased one and followed the instructions correctly - it would fit

Thanks

Pipe Dynamics

Customer Reviews

Based on 5 reviews
80%
(4)
0%
(0)
20%
(1)
0%
(0)
0%
(0)
H
Harry
Vw golf “s” 2009

I have the same question as Sam on this page. I currently have a VW Golf “S” not a TSI, will this fit the same?

Many thanks

S
Sam
Mk6 1.4, not tsi

Hi there I have a mk6 1.4 s, NOT THE TSI, will this still fit, if not do you have any products or know anyone that has any that do fit?

O
Ole Jakob Oldebråten
Exhaust

Hello Pipe dynamics!

I have a Golf mk5 1.4 170bhp and I wonder if it also fits my car?

Thanks
- Ole Jakob

R
Remy
Silencieux arrière

Bonjour savez vous si cela s'adapte sur mk6 1.4 16v s'il vous plaît ?

T
Thomas Goldie
Exhaust hanger

Exhaust hanger doesn’t seem to be in the right place as the standard one is offset upwards were as the one is just a straight bar, just something I seen in a video that was of the 1.4 tsi mk6 golf same as mine

Hi Thomas,

Thanks for your review.

I'm sure you will see, from the video that you refer to, that the customer didn't follow the correct fitting instructions we provided and decided to cut the back box off in a place he thought would make the exhaust sit right, which was about 2' short of where we indicate on the instructions, which then resulted in the exhaust not fitting or sitting right and the hanger not reaching the rubber - had he cut the box off at the weld the exhaust would've fitted perfectly and the hanger would've fitted into the rubber no problem (as you can see in the image on this listing) we have made and fitted hundreds of these so we can guarantee where the cut needs to be made. The shape of the hanger in comparison to the standard hanger is irrelevant as you can see, the whole rear section is a completely different design so the hanger on this back box delete is exclusively designed to for fitment of this part to the standard rubber.

If you purchased one and followed the instructions correctly - it would fit

Thanks

Pipe Dynamics