Ir directamente a la información del producto
1 de 10

VW Golf Mk6 1.4tsi (122bhp) Back Box Eliminar

VW Golf Mk6 1.4tsi (122bhp) Back Box Eliminar

SKU:PDVW14

Precio habitual £205.00 GBP
Precio habitual Precio de oferta £205.00 GBP
Oferta Agotado
Impuesto incluido.
Una sección trasera de acero inoxidable completa (eliminación de caja posterior) para VW Golf 1.4tsi 122bhp 2009 - 2012>
 
Viene con tubos de caza de corte de corte de doble piel de doble piel pulida de 3 "
Libre P
Garantía de por vida gratuita
Acero inoxidable de alto grado 304
Completamente soldado
Curvas de mandril
Viene listo para sujetar con instrucciones de ajuste, aunque, le recomendamos que tenga esto ajustado en un garaje local.
 
Una forma rentable de mejorar el sonido y el aspecto de su automóvil
 
Tenga en cuenta que esto solo se ajustará al sistema estándar y al difusor estándaro cualquier difusor de posventa que esté diseñado para adaptarse al escape estándarpara MK6 VW Golf 1.4tsi 122bhp
La imagen 2 y 3 muestran la opción de tubo de escape 'in Rolled' instalada en el automóvil
 
Asegúrese de leer esto correctamente, ya que todos nuestros productos están hechos a pedido, por lo tanto, las devoluciones no se aceptan; si no está seguro de que si se ajusta a los suyos, contáctenos con su reg y lo confirmaremos.
Llámenos al 01333 421204
Envíenos un correo electrónico a info@pipedynamics.co.uk
 

Ver todos los detalles

Customer Reviews

Based on 5 reviews
80%
(4)
0%
(0)
20%
(1)
0%
(0)
0%
(0)
H
Harry
Vw golf “s” 2009

I have the same question as Sam on this page. I currently have a VW Golf “S” not a TSI, will this fit the same?

Many thanks

S
Sam
Mk6 1.4, not tsi

Hi there I have a mk6 1.4 s, NOT THE TSI, will this still fit, if not do you have any products or know anyone that has any that do fit?

O
Ole Jakob Oldebråten
Exhaust

Hello Pipe dynamics!

I have a Golf mk5 1.4 170bhp and I wonder if it also fits my car?

Thanks
- Ole Jakob

R
Remy
Silencieux arrière

Bonjour savez vous si cela s'adapte sur mk6 1.4 16v s'il vous plaît ?

T
Thomas Goldie
Exhaust hanger

Exhaust hanger doesn’t seem to be in the right place as the standard one is offset upwards were as the one is just a straight bar, just something I seen in a video that was of the 1.4 tsi mk6 golf same as mine

Hi Thomas,

Thanks for your review.

I'm sure you will see, from the video that you refer to, that the customer didn't follow the correct fitting instructions we provided and decided to cut the back box off in a place he thought would make the exhaust sit right, which was about 2' short of where we indicate on the instructions, which then resulted in the exhaust not fitting or sitting right and the hanger not reaching the rubber - had he cut the box off at the weld the exhaust would've fitted perfectly and the hanger would've fitted into the rubber no problem (as you can see in the image on this listing) we have made and fitted hundreds of these so we can guarantee where the cut needs to be made. The shape of the hanger in comparison to the standard hanger is irrelevant as you can see, the whole rear section is a completely different design so the hanger on this back box delete is exclusively designed to for fitment of this part to the standard rubber.

If you purchased one and followed the instructions correctly - it would fit

Thanks

Pipe Dynamics

Customer Reviews

Based on 5 reviews
80%
(4)
0%
(0)
20%
(1)
0%
(0)
0%
(0)
H
Harry
Vw golf “s” 2009

I have the same question as Sam on this page. I currently have a VW Golf “S” not a TSI, will this fit the same?

Many thanks

S
Sam
Mk6 1.4, not tsi

Hi there I have a mk6 1.4 s, NOT THE TSI, will this still fit, if not do you have any products or know anyone that has any that do fit?

O
Ole Jakob Oldebråten
Exhaust

Hello Pipe dynamics!

I have a Golf mk5 1.4 170bhp and I wonder if it also fits my car?

Thanks
- Ole Jakob

R
Remy
Silencieux arrière

Bonjour savez vous si cela s'adapte sur mk6 1.4 16v s'il vous plaît ?

T
Thomas Goldie
Exhaust hanger

Exhaust hanger doesn’t seem to be in the right place as the standard one is offset upwards were as the one is just a straight bar, just something I seen in a video that was of the 1.4 tsi mk6 golf same as mine

Hi Thomas,

Thanks for your review.

I'm sure you will see, from the video that you refer to, that the customer didn't follow the correct fitting instructions we provided and decided to cut the back box off in a place he thought would make the exhaust sit right, which was about 2' short of where we indicate on the instructions, which then resulted in the exhaust not fitting or sitting right and the hanger not reaching the rubber - had he cut the box off at the weld the exhaust would've fitted perfectly and the hanger would've fitted into the rubber no problem (as you can see in the image on this listing) we have made and fitted hundreds of these so we can guarantee where the cut needs to be made. The shape of the hanger in comparison to the standard hanger is irrelevant as you can see, the whole rear section is a completely different design so the hanger on this back box delete is exclusively designed to for fitment of this part to the standard rubber.

If you purchased one and followed the instructions correctly - it would fit

Thanks

Pipe Dynamics